6-Inch Lift Kit for 2008-2010 Ford F-250/F-350 Super Duty 4WD Gas – Leaf Springs

Description

Take your 2008-2010 Ford Super Duty F-250/F-350 gas truck to the next level with this 6-inch Lift Kit from BDS Suspensions! Engineered for awesome performance on ANY terrain, this kit allows you to run up to 37″ tires.

Up front, this lift kit includes:

• Gas-specific Pro-Ride coil springs
• Heavy-duty radius arm drop brackets
• Forged drop pitman arm and track bar bracket for steering correction
• Sway bar relocation
• Brake line brackets
• Custom-tuned nitrogen-charged shocks

In the rear, this lift kit utilizes:

• High-strength lift blocks
• Longer U-bolts
• Brake line brackets
• A matching set of NX2 Nitro or FOX Performance Shocks

Pro-Ride Coil Springs

A pair of full-length gas-specific Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains.

Features & Benefits:

• Easy 100% Bolt-on installation
• Pro-Ride dual-rate coil springs provide a remarkable ride through any terrain
• Heavy-duty radius arm drop brackets provide the correct caster and will maintain your stock driving characteristics.
• The track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
• Steel lift blocks with built-in bump stops provide level stance from front to rear
• Standard NX2 Nitro Shocks with vehicle-specific valving for better control
• Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road

Please Note:

• Removal of the factory block is required.
• Installation of the rear block kit will result in a “pre-runner” look with the rear of the vehicle 2″ lower than the front. To get a level stance you must upgrade to the rear leaf spring option.
• These trucks were manufactured with and without top-mounted overload springs on the rear leaf springs. A top-mounted overload is an extra leaf separate from the pack is set above the main leaf. You will need to identify which you have before ordering.
• If your vehicle has a carrier bearing, you must order 123402 in the options section.
• Although extremely rare front driveline vibration may occur.
• Front exhaust modification may be required to clear the front driveshaft on gas models.
• U-bolts will not fit dually models.
• Dropped pitman arm will not fit 10-lug wide track F350 models.

Lift Kit Attributes:

• Front Lift Height: 6″
• Front Lift Method: Coil Spring
• Installation Difficulty: Moderate
• Installation Time: 8 Hrs
• Installation Tools: Drill, Pitman Arm Puller
• Rear Lift Height: 4″
• Rear Lift Method: Block
• Rear Lift Option: Block Kit Without Factory Overload
• Shocks Included: Yes

6-Inch Lift Kit for 2008-2010 Ford F-250/F-350 Super Duty 4WD Gas | SKU: BDS562FS